 |
 |
 |
|
DAVINCI-II S is surely, by full right, the most innovative dashboard in the field
for the philosophy by virtue of which it has been conceived and designed,
as well as for its technology enclosed in a compact design
executed with the greatest care.
 
|
DAVINCI-II S revolutionizes the concept of digital dashboard and defines
a new technological step in the world market due to the full support of
the exclusive wireless WID modules, already several times world
champions on Starlane Corsaro devices.
|
|
DAVINCI-II is the most compact and slim dashboard on
the market among the latest generation devices with a 5 "TFT display.
This makes it easy to install and place on all the bikes, which now have
increasingly tapered windscreens and smaller spaces.
Like all Starlane laptimers, it comes with an internal GPS antenna.
Unlike other brands, it does not require any uncomfortable external
antenna to be positioned on the vehicle with relative cables and risks
of breakage.
Allows the immediate use thanks to the built-in library of hundreds
of tracks with intermediates, between which the device automatically
recognizes the current one.
Featuring S.E.P.L.A. (Starlane Enhanced Precision Laptiming
Algorithm) function: a lap timing algorithm allowing very high lap
timing precision.
|
|
LEAN ANGLE INDICATION
|
DAVINCI-II S comes by factory with the new Inertial Pack features .
Inertial Pack performs the calculation and indication of:
LEAN ANGLE
LATERAL ACCELERATION in G
LONGITUDINAL ACCELERATION in G
The analysis software also shows the acceleration and lean angle charts.
|
The system calculates the lean angle relative to the axis (B) passing through the center
of gravity of the motorcycle + rider, considering also the rider position.
The lean angle is calculated by a high precision algorithm developed by Starlane
and does not require the installation of sensors on the vehicle.
Unlike other systems, it also allows correct angle alignment
and acceleration with the instantaneous position on the circuit.
|
|
|
DAVINCI-II S shows the lean angle degrees on the main
screen which indicates the current angle and the maximum degrees reached
in the last right and left corners.
|
|
The connector on the back side allows the safe connection
to the loom in absolute waterproofness (IP67 protection grade) and
mechanical wires strength.
A wide range of plug-kits for various motorcycle models is available.
The system has been designed to cover with the same main unit the
maximum range of configurations both software and hardware, this allows
you to move it on motorcycle models, even totally different, simply by
changing the plug-kit.
To facilitate the setting, DaVinci-II can automatically recognize
the installed plug-kit model and automatically manage the basic
configuration for that bike.
|
DaVinci-II supports optional WID (Wireless Input Device) wireless
sensors and modules technology , which give the possibility to expand
the system simply by positioning the WID module under the saddle and
without requiring wiring to bring the signal up to the front, as
communication takes place in a totally wireless way.
This results in a professional, complete and unique data acquisition
system in the world, which can be totally expanded wirelessly.
This technology, developed by Starlane, and now very tested, which
has already led the Corsaro devices to win in 2 years 6 world titles in
karting, 2 Italian Supersport 600 titles with Massimo Roccoli, and the
world title in 2017 in the World Supersport 300 .
In any case DaVinci-II allows hybrid connection, both in traditional
wired and wireless mode, according to the specific needs of the user.
All the main signals for normal operation are managed directly with
universal wiring or with the dedicated plug-kits for the various models.
|
|
WID-C MINIATURIZED WIRELESS MODULE (60mm X 44mm X 21mm)
|
WID-C (code WC3A)
Available Inputs:
-3 Generic Analog for the connection of sensors with 0-5V analog
output as, for example: linear potentiometric suspension sensors with
codes: SSLIN075M8, SSLIN150M8, SSLIN075PROM8, SSLIN150PROM8 or brake
pressure sensor with code SSPBK60M8.
-Additional CAN BUS Line.
-Power Supply: 12V from vehicle.
|
|
RID-LAMBDA (code RID1RLT) comes with BOSCH LSU4.9
Wide Band Lambda sensor and transmits to DaVinci-II the instantaneous
Air/Fuel ratio values to achieve the best mapping for your engine
management system.
|
Channels acquired by DaVinci-II S
• Laptime with intermediates
• GPS Speed
• GPS Trajectroies
• RPM
• Engaged Gear
• TPS (Throttle position sensor)
• Lean Angle
• Lateral and Longitudinal Accelerations
• All channels available on connected optional WID modules.
|
|
DAVINCI-II S allows data download via USB cable or via Bluetooth and WiFi.
With the MAAT software it is possible to analyze the downloaded sessions.
|
|
DAVINCI-II S CHARACTERISTICS
|
1) DOUBLE CONSTELLATION GPS+GLONASS RECEIVER AND ANTENNA BUILT IN THE INSTRUMENT:
the DAVINCI-II shock-proof Nylon-glass charged body accommodates the
new double constellation receiver which use in symbiosis the american
GPS and the russian GLONASS satellite systems. This solution increases
dramatically the precision due to the vero high number of satellite
involved in instantaneous position, speed, trajectory and lap time
determination.
2) YOU CAN SAY GOOD-BYE TO ALL UNPRACTICAL INFRARED TRANSMITTERS ARRANGED ON THE PIT WALL:
the use of the GPS+GLONASS system intended to detect the lap time
will make DAVINCI-II completely autonomous, requiring no beacon
transmitters, such as the infrared ones used by old-generation systems.
Everything is getting much simpler. It is no longer necessary to
arrange the transmitter and to recharge the battery, which is extremely
annoying and unpractical, with the risk of forgetting it on the wall or
having it stolen.
3) MANAGEMENT OF THE FINISH LINE AND 3 INTERMEDIATES:
by means of the track librari, available in the Device or in MAAT
software, you can set up the coordinates of 4 lap trigger lines (main
finish line + 3 optional intermediates). Whenever you cross a finish
line or an intermediate, DAVINCI-II will indicate the relative split
time and store its value. You can therefore quickly evaluate your own
performance even if you are driving along a part of the track far from
the main straight stretch, which would be expensive and unpractical if
you used any other type of lap timer.
|
4) INDICATION OF THE ACHIEVABLE IDEAL TIME:
by managing intermediates, DAVINCI-II can calculate the time a
driver can ideally achieve for every single session. This function is
obtained by adding the best sectorial times. This will help you
understand the lap time you might have achieved if there had been no
traffic in a specific point of the track or if you had done a lap on top
of your absolute performance.
5) DOUBLE FUNCTION "BEST LAP" LED:
the "BEST LAP" LED will turn on if you have improved your previous
lap and it will blink if the lap you have just done is the best of the
session. This solution will supply the driver with all the information
necessary for performance without any distraction.
If you have set up intermediate finish lines, the LED is also
enabled whenever you cross an intermediate. This means that this
instrument is extremely useful to realise without any distraction
whether you are improving compared to the same intermediate time of the
previous lap or whether you have just accomplished the best intermediate
time of the session.
6) GPS SPEED MEASUREMENT:
the advantage of using a GPS+GLONASS system is also that you can
measure the vehicle speed with the highest degree of accuracy without
having to install any sensor on the vehicle. No user setup is required
and, above all, any measurement is always accurate, not altered by the
inclination of the vehicle or tire deformation or spinning.
|
7) SETTABLE LED BAR AND SHIFT LIGHT:
DAVINCI-II is equipped with a bar with 10 high-brightness LEDs that
can be totally set for both speed and color. Also the shift light can be
set at the desired shift regime and with the desired color.
8) ENGAGED GEAR INDICATOR:
DAVINCI-II indicates the gear engaged by calculating the ratio
between the engine revolutions and the wheel speed or the data coming
from the ECU for the motorcycle models with this functionality.
9)SETTABLE ALARMs:
DAVINCI-II is equipped with 8 alarm LEDs that can also be configured in the color.
10) DOUBLE HOUR METER FOR THE PERFECT PERIODICAL MAINTENANCE OF THE VEHICLE:
DAVINCI-II has also got two hour meters that can be separately reset
for the periodical maintenance of the vehicle. Hour meters are
activated by the tacho signal and the GPS+GLONASS speed signal. This
solution can operate the hour meters even if you do not wish to connect
the tacho signal.
11) USB, BLUETOOTH 4.0 AND WIFI DATA DOWNLOAD:
In addition to the normal USB connection, DAVINCI-II is equipped
with Bluetooth 4.0 and WiFi for setting parameters and targets and
downloading data that can then be analyzed directly with the new MAAT
software.
|
|
12) SUPPLIED WITH THE MAAT SOFTWARE:
MAAT software supplied with DAVINCI-II can file, analyze and print
the data acquired and graphically represent the paths you have driven
across with the relative acceleration and deceleration points for a
lap-by-lap comparison.
|
|
13) 999-LAP MEMORY WITH AUTOMATIC MANAGEMENT OF 99 TEST SESSIONS:
DAVINCI-II will automatically create a new session whenever you
access the track. This means that you can analyse the times you have
stored during the various sessions even at the end of the day without
having to delete memory whenever you access the track. You can store the
Date and Time of every single session as well as the total time, the
intermediates, the maximum speed and the max. engine revolutions for
every single lap.
14) CYCLICAL MEMORY MANAGEMENT:
with DAVINCI-II you will never face memory full issues because,in
order to allow a continuous usage, it manages the available space by
erasing automatically the oldest sessions when the memory is almost
full.
15) STORAGE OF THE FINISH LINE COORDINATES OF THE TRACKS MOST USED:
you can store the coordinates acquired for the finish line of the
tracks you are training on most frequently. You can file up to 16 tracks
and easily call the finish line of the current track without having to
reset it every time.
16) COLOR HIGH BRIGHTNESS 5" TFT 800x480 DISPLAY WITH ANTI-GLARE PROTECTION:
DAVINCI-II is equipped with a display that uses high-brightness TFT
technology and a front panel with a special anti-reflection treatment
that minimizes the annoying reflections typical of the original
instruments. DAVINCI-II alos comes with a icon-based user interface that
allows to analyse all stored data and set up all wished functions in an
unmatched user-friendly and immediate manner.
17) WATER-RESISTANT:
DAVINCI-II is water resistant.
|
Specifications:
 |
Automatic lap timer with 1/100 second resolution |
|
Double constellation 10Hz. GPS+GLONASS detection system with aeronautical algorithms |
|
Built-in track library with hundreds of tracks with intermediates |
|
Automatic finish line and intermediates positioning function without user intervention (SAFD-2) |
|
Inertial Pack feature with Lean Angle and Lateral and Longitudinal Accelerations indication |
|
Calculation of the achievable Ideal Time |
|
Calculation and visualization of 3 Intermediates |
|
Multilanguage menu (Italian, English, German, French, Spanish) |
|
Digital engine speed indicator |
|
GPS speed indication |
|
Engaged Gear Indicator |
|
Water Thermometer |
|
Thermocouple K 1000°c thermometer |
|
Settable alarms |
|
Max. engine speed readout = 32000; max. speed = 350 Km/h or 218 Mph |
|
Settable LED Bar and Shift Light |
|
Double hour meter for engine maintenance |
|
1 Analog input for TPS signal |
|
1 Wheel Speed input |
|
Expandable with optional WID wireless modules |
|
Data acquisiton lines: 1 Starlane Starlane CAN BUS + 1 CAN BUS for ECU + 1 K-Line + 1 RS232 |
|
USB, Bluetooth 4.0 and WiFi Data download |
|
Memory of 999 laps that can be managed in 99 sessions |
|
Storage of max. RPM and speed values for every single lap |
|
Speed indication in Km/h or Mph |
|
Settable main screen |
|
TFT 5" Color 800x480 high brightness display with anti glare treatment |
|
Water resistant |
|
Dimensions: width 157 mm - height 104 mm - depth 22.6 mm |
|
Supply: vehicle 12Volts battery |
|
Universal installation or with optional bike-dedicated pluk kits |
|
MAAT software available for download |
|
Intended use: Car - Motorbike |
|
Content of the package for DaVinci-II S (COD. CDAV2S):
|
N° 1 DAVINCI-II S dashboard |
|
N° 1 Universal bracket with silent blocks | |
|
|
|
 |
|
 |
|