BIAGGI REPLICA TRIPLE CLAMP KIT FOR APRILIA RSV4 FACTORY
TRIPLE CLAMP KIT APRILIA RSV4 FACTORY (Cod. TCRSV4)
In addition to many electronic devices, Starlane is
developing various parts for Aprilia RSV4 (which is also one of the
company's lab-bikes), one of these parts is the triple clamp kit based
on the design and structural philosophy of the units mounted on Max
Biaggi's official bike.
The particular design is indeed the prerequisite of the flexibility
feautres necessary to properly dampen lateral stresses at the maximum
lean angles while keeping the maximum stiffness to the longitudinal
stresses typical of the braking phase.
Replacing the original clamps with this kit will immediately improve
the riding feeling as well as increase braking stability and steering
precision in corners.
The kit has been totally designed with the most advanced CAD and FEM analysis engineering software programmes.
The lower plate has been developed to allow the eccentric stem to
rotate quickly without disassembling the bike clamps, simply by
loosening the two screws of the eccentric stem and the top plate bolt
you can modify the offset from 30mm (standard offset of the original
fork) to 25mm.
The kit is also supplied with an additional neutral stem that can replace the eccentric one, thus setting the offset to 27.5mm.
- Totally carved from Ergal 7075
- Black anodizing
- Quick offset setting (offset 30-25mm) with eccentric stem
- Additional neutral stem included in the kit (offset 27.5mm)
- Fits original frame and fork